Coarse Sand for Construction in Mysuru: A Complete Local Guide

When planning construction in Mysuru, one key factor that determines the durability and strength of a building is the quality of sand used — especially coarse sand. From foundations to structural concrete, the right type of sand ensures a safe and long-lasting structure.

In this blog, we’ll break down everything you need to know about coarse sand in Mysuru, including its properties, uses, pricing, and how it compares with other sands in the market.

What is Coarse Sand?

Coarse sand, also known as pit sand, is a naturally occurring sand with large, gritty particles ranging from 0.5mm to 2mm in diameter. It is usually sourced from deep pits and is free from salts, clay, and organic materials, making it a solid choice for structural work.

In the context of Mysuru construction, coarse sand is commonly used in projects where strength and drainage are top priorities.

Properties of Coarse Sand

What is Coarse Sand Used For?

Builders in Mysuru frequently use coarse sand for:

• Concrete mixes (slabs, beams, columns)
• RCC and foundation construction
• Paver block and interlocking tile installations
• Backfilling in landscaping and retaining walls
• Sub-base for pavements and roads

Its excellent binding and drainage properties make it a top choice for structural construction in Mysuru.

Coarse Sand for Plastering – Should You Use It?

Short answer: No.

In Mysuru, coarse sand is not suitable for plastering because of its grainy texture. It doesn’t give a smooth finish and may lead to cracks in the plaster. Instead, go for:

• River Sand
• Plastering M-Sand (S1 grade)

These offer the fine texture and smooth finish needed for walls and ceilings.

Coarse Sand Price in Mysuru (2025)

If you’re planning a project in Mysore or surrounding areas, here’s what you can expect:

• Per Ton: ₹1,100 – ₹1,600
• Per Unit (100 CFT): ₹1,200 – ₹1,800
• Per Cubic Meter: ₹800 – ₹1,400

Prices vary slightly depending on the source, supplier, and transport location in Mysuru.

Difference Between Coarse Sand and Fine Sand

What’s the Difference Between Coarse Sand and Normal Sand?

“Normal sand” is a generic term that may refer to any locally available sand, such as river sand or M-sand. Coarse sand, however, specifically refers to larger, rough-textured particles used in structural work.

So, if you’re buying construction sand in Mysuru, make sure to clarify whether you need coarse, fine, or graded M-sand for your purpose.

Conclusion

If you’re involved in residential or commercial construction in Mysuru, choosing the right type of sand can make or break your project. Coarse sand is a top choice for foundations, slabs, and RCC due to its strength and durability.

At Nammane Construction, we use only high-quality sand in Mysuru sourced from trusted suppliers to ensure that your home stands strong for generations.

FAQs On Coarse Sand

What are the benefits of coarse sand?

• Strong binding with cement
• Excellent load-bearing capacity
• Good drainage
• Ideal for concrete, RCC, and foundations

What grade is coarse sand?

It typically falls under Zone I or Zone II as per IS: 383. These zones are suitable for structural concrete work.

Is building sand, coarse sand?

Not always. Building sand can refer to both coarse and fine sands depending on the application. Coarse sand is specifically used for heavy structural work, not plastering.

How thick is coarse sand?

Coarse sand grains range from 0.5 mm to 2 mm. This thickness helps create better bonding in concrete applications.